alternate_logistics_support_analysis_control_number_code

A code used to allow documentation of multiple models of a system/equipment, or alternate design considerations of an item, using the same LCN breakdown.
NOTE:

• ALC of zero,zero “00” will always be used as the basic system. There are no blanks allowed. ALCs will be assigned from 01 to ZZ in ascending order.
• ALC equates to S1000D Disassembly Code Variant, which is a constituent element of the Data Module Code.

container_length

The smallest standard container, in feet, that can be used to transport the system/equipment.

container_type

The designation of the standard container used to transport the system/equipment, e.g., ANSI/ISO, European.

crest_angle

The angle in degrees at which a wheeled vehicle can approach, negotiate, and depart a ramp 15-feet long connecting two horizontal surfaces.

delivery_schedule

A code that indicates if the transportation by fiscal year is needed.

Table — Delivery Schedule

end_item_acronym_code

A code that uniquely identifies the system/equipment end item. This code will be assigned by the requiring authority. It will remain constant throughout the item’s life cycle (e.g., TOW, PATRIOT, Tomahawk, Sparrow, and ALCM).

environmental_handling_and_transportation_indicator

A code that indicates if an item will require special consideration to meet all environmental packaging, handling, storage, and transportation requirements.

Table — Environmental Handling and Transportation Indicator

external_or_internal_load_indicator

A code that indicates how the aircraft/helicopter will transport the system/equipment.

Table — External or Internal Load Indicator

first_quarter_procurement_quantity

The number of systems/equipment being procured.

fourth_quarter_procurement_quantity

See first_quarter_procurement_quantity

freight_classification

The recommended freight classification of the item corresponding to the particular mode of transportation that will be used to transport the item.

helicopter_mission_altitude

Mission requirement indicating maximum measurement. The highest altitude in feet above sea level.

helicopter_mission_distance

Mission requirement indicating maximum measurement. The longest distance in nautical miles.

helicopter_mission_payload

Mission requirement indicating maximum measurement. The heaviest payload in pounds

helicopter_mission_temperature

Mission requirement indicating maximum measurement. The coldest temperature in degrees Farenheit.

helicopter_mission_time

Mission requirement indicating maximum measurement. The longest time in hours.

highway_alternate_model_load

The payload capacity of the transporter (truck, trailer, etc.)

Table — Highway Alternate Model Load

highway_alternate_model_type

The model type and number of the transporter.

highway_prime_model_load

See highway_alternate_model_load

highway_prime_model_type

The model type and number of the transporter.

length_front_inside

The distance from the inside of the innermost front tire to the inside of the opposite front innermost tire.

length_front_outside

The distance from the outside of the outermost front tire to the outside of the opposite front outermost tire.

length_rear_inside

The distance from the inside of the innermost rear tire to the inside of the opposite rear innermost tire.

length_rear_outside

The distance from the outside of the outermost rear tire to the outside of the opposite rear outermost tire.

logistics_support_analysis_control_number

A code that represents a functional or hardware generation breakdown/disassembly sequence of system/equipment hardware including SE, training equipment, and installation (connecting) hardware. For additional information on assignment of LCN, refer to the GEIA-HB-0007.

military_load_classification_empty

Identification of the military load classification number (for military bridges). The classification number empty is against the operational weight empty. The classification number loaded is against the operational weight loaded.

military_load_classification_loaded

See military_load_classification_empty

military_unit_type

The specific types of military units that will use or transport the system/equipment.

mobility_type

A code that indicates the system/equipment type of mobility.

Table — Mobility Type

net_explosive_weight

The net explosive weight, in pounds per package or per pallet, of the item for all Department of Transportation class A or B explosives. The net explosive weight for class C explosives is required for items shipped to Hawaii, Italy, and United Kingdom.

nonoperational_fragility_factor

The maximum force acceleration or deceleration, expressed in units of gravity (Gs) that can be applied to an item in its non-operating state without causing physical damage or change in its operational characteristics. The non-operational fragility factor should only be completed for an item that has been determined, or assumed to have a non-operational fragility tolerance of less than 40 Gs.

number_of_skids

The total number of skids of the system/equipment that is being transported.

operational_weight_empty

The operational weight in tons of the system/equipment (empty and loaded) being transported.

operational_weight_loaded

See operational_weight_empty

proper_shipping_name

The proper shipping name of the item to be transported, if this item is categorized as a hazardous material (e.g., CFR 49, UNTDF).

rail_transportation_country

The foreign country or countries where rail transportation is required.

rail_use

A code indicating the type of rail use applicable to transport the system/equipment.

Table — Rail Use

revision_date

The date of an event, expressed as the last two positions of the year, month and day of the event, e.g., YYMMDD.

• Revision Date – A date when the transportability was last revised.
• SERD Date of Revision Submission – A date when a revised SERD was submitted.

sea_deck_stowage

A code indicating if the deck stowage is permissible.

Table — Sea Deck Stowage

second_quarter_procurement_quantity

See first_quarter_procurement_quantity

sectionalized_identification

A counter applied to each sectionalized portion of the system/equipment for transportation. The same number may be applied to different LCNs if the LCNs are grouped together for transport. A unique counter is applied against each separately sectionalized grouping of the system/equipment.

shipping_configuration

A code that identifies the shipping configuration of the item being reported. Frequently used codes are as follows:

Table — Shipping Configuration

shipping_weight_empty

The shipping weight in tons of the system/equipment (empty and loaded) being transported.

shipping_weight_loaded

See shipping_weight_empty

skid_area

A numeric value describing the size of the skid of the transported item in units contained in the associated UM.

speed

The maximum speed of the system/equipment in miles per hour.

theater_of_operation

The theater of operation for the system/equipment.

Table — Theater of Operation

third_quarter_procurement_quantity

See first_quarter_procurement_quantity

towing_speed

The maximum towing speed of the system/equipment in miles per hour.

tracked_ground_pressure

Specify the ground pressure created by the heaviest pad (pounds per square inch).

tracked_pad_shoe_area

A numeric value describing the size of the tracked shoe pad actually in contact with the ground of the transported item in units contained in the associated UM.

tracked_pads_touching

The number of tracked shoe pads actually in contact with the ground.

tracked_road_wheel_weight

the weight in pounds supported by the road wheel of the tracked item.

transport_fiscal_year

The period beginning October l of one calendar year and ending on September 30 of the following calendar year. The fiscal year is designated by the calendar year in which it ends.

transportation_character_mode_type

A code that describes how the system/equipment can be transported.

Table — Transportation Character Mode Type

transportation_character_number

A code that identifies each different way that a system/equipment can be transported. This is a numeric character assigned in sequence.

transportation_contract_number

The unique number assigned to the contract in question, by which it can be specifically identified.

transportation_disaster_response_force_narrative

Describes in detail all disaster response force requirements for a transportation disaster encountered while transporting the item (e.g., security, firefighting, medical). For this element to be used, a (Y) must be entered into the Environmental Handling and Transportation Indicator entity JA.

transportation_environmental_considerations_narrative

A description of any special environmental/hazardous considerations required for the transportation of the system/equipment under analysis. This element contains a narrative description identifying any special environmental considerations when an item is being transported or being designed for transportation. For each item classified as a hazardous material state the class of hazardous material as specified in Title 49, Code of Federal Regulations, parts 100-179, Transportation; AFR 71-4, Preparing Hazardous Materials for Military Air Shipments; International Maritime Good Code; or, International Civil Dangerous Goods by Air. Also state which of these documents were used to acquire the code(s). For this element to be used, a (Y) must be entered into the Environmental Handling and Transportation Indicator entity JA.

transportation_indicator

A code that signifies whether the shipping modes for the item or the transport end items itself is being analyzed.

Table — Transportation Indicator

transportation_item_designator

A part of nomenclature that provides a method for identifying equipment, usually by broad performance and use characteristics and general configuration. It is a data chain consisting of all or part of the data elements type, model, and series designators, in that order. A suffix may be added for use with the Joint Electronics Type Designation System. Instructions for coding the type, model, and series designators consist of the following subfields:

• a. Type designator -- string -- 7

A broad categorization of equipment based upon function or use

• b. Model designator -- string -- 10

Identifies equipment within a particular type designator having essentially the same performance characteristics.

• c. Series designator -- string -- 2

Identifies equipment within a particular model designator having the same basic design, but not necessarily the same configuration.

• d. Suffix designator -- string -- 7

Supplemental information used with type, model, and series designators for items using the Joint Electronics Type Designation System. Instructions for coding suffix designator can be found in the following publications:
MIL-HDBK-1812
MIL-STD-196E.

transportation_lifting_and_tiedown_remarks_narrative

Identifies the number, location, and strength (rated, yield, and ultimate) of the lifting provisions and tiedown remarks for the system/equipment under analysis. Identified are the locations of hard point lifting provisions provided for aerial recovery. States if the lifting provisions meet criteria of MIL-STD-209K and interface with all aerial recovery and sling components.

transportation_military_distance_classification_narrative

Describes the military quantity distance class and storage compatibility groups (Military Distance Classification) for the item being transported. Reference AFR 71-4, Preparing Hazardous Materials for Military Air Shipments, for instructions. For this element to be used, a (Y) must be entered into the Environmental Handling and Transportation Indicator entity JA.

transportation_projection_remarks_narrative

States the dimensions and locations of any significant projections of the system under analysis. This contains a narrative explanation of the projection points of the item to be transported.

transportation_regulatory_requirements_narrative

Describes data to show compliance with regulatory requirements (Title 49, Code of Federal Regulations).

transportation_remarks_narrative

A narrative field for transportation remarks that may include towing, self-propelled, handling, and air dropped information, plus any transportation information not captured in other data elements or other narrative fields.

transportation_sectionalized_remarks_narrative

A description of the sectionalization information for each section that is being transported. Narrative information about whether the item can be sectionalized, folded, or reduced for transport, including the following for each component or subassembly; the time required to disassemble at departure site and reassemble at destination site (man-hours and elapsed time) and special equipment or tools required for sectionalization (e.g., cranes, forklifts, wrecker trucks, pallets, nitrogen, calibration equipment, fixtures, etc.). Note: if a task code is assigned to this operation, then these requirements should be referenced using the appropriate LCN, ALC, and task code.

transportation_shock_vibration_remarks_narrative

A description of the fragility, shock, and vibration considerations required for the system/equipment under analysis (e.g., MIL-STD-810F rail impact test, drop test).

transportation_special_service_and_equipment_narrative

A description of any information concerning the requirements for special services and equipment (railcars, highway vehicles, or materiel handling equipment such as spreader bars or slings) when required for the system under analysis.

transportation_transport_to_and_from_narrative

Describes from where the item is transported and to where the item is transported.

transportation_unusual_and_special_requirements_narrative

Describes any unusual item transportation characteristics (e.g., temperature limits, humidity limits, escorts required, etc.). Identification of any unusual item characteristics to be considered for transportation and packaging purposes. Some of these considerations are: temperature limits; pressure limits; electrical sources required during transit; humidity control required; escorts required; etc. For this entity to be used, a (Y) must be entered into the Environmental Handling and Transportation Indicator entity JA.

transportation_venting_and_protective_clothing_narrative

Describes the venting and protective clothing requirements necessary for the transportation of the item. For this element to be used, a (Y) must be entered into the Environmental Handling and Transportation Indicator entity JA.

transported_configuration_number

A code that differentiates each mobility type. This is a sequentially assigned number beginning with 1 through 99.

transported_end_item_skid_remarks_narrative

Describes any pertinent information pertaining to skid areas for the system under analysis.

transported_end_item_transported_other_equipment_narrative

Captures all other information pertaining to an item that is being transported that is not tracked, wheeled, or skid mounted.

transported_end_item_turning_information_narrative

Describes the tracked/wheeled turning diameter that will include wall-to-wall, curb-to-curb. For wheeled vehicles only, in narrative format, the 90 degree and 180 degree turning radius in both wall-to-wall and curb-to-curb will be described.

transported_end_item_wheeled_axle_and_suspension_remarks_narrative

Describes any information pertaining to the axle and suspension system of the item under analysis. The load ratings for each suspension and the axle loads for each axle for both an empty and loaded vehicle. This may apply to both tracked and wheeled vehicles.

transported_end_item_wheeled_tire_requirements_narrative

Identifies any pertinent information pertaining to the tires for the system under analysis and is a narrative description of the tire requirements. This may apply to both tracked and wheeled vehicles.

wheeled_inflation_pressure

The inflation pressure of the tire. This may apply to both tracked and wheeled vehicles.

wheeled_number_of_plies

The number of plies of the tire. This may apply to both tracked and wheeled vehicles.

wheeled_number_tires

The number of tires for the vehicle. This may apply to both tracked and wheeled vehicles.

wheeled_tire_load_ratings

The load ratings of the tire. This may apply to both tracked and wheeled vehicles.

wheeled_tire_size

The size of the tire. This may apply to both tracked and wheeled vehicles.

wheeled_weight_ratings

The weight ratings of the tire. This may apply to both tracked and wheeled vehicles.