adapter_interconnector_device_apportioned_unit_cost_nonrecurring

See adapter_interconnector_device_apportioned_unit_cost_recurring

adapter_interconnector_device_apportioned_unit_cost_recurring

The amount in U.S. dollars given, paid, charged, or engaged to be paid or given for items or service on a nonrecurring (one time occurrence) and recurring (repeating occurrence) cost basis, that is assigned to the material or equipment required.

adapter_interconnector_device_commercial_and_government_entity_code

A five-character code assigned by the DLIS to the design control activity or actual manufacturer of an item as contained in the Cataloging Handbook H4/H8 Series. Assistance in finding CAGE codes may be found at http://www.dlis.dla.mil/cage_welcome.asp

adapter_interconnector_device_common_unit_under_test

The number of UUTs with which the adapter, interconnection device, or signal conditioning circuitry can be used.

adapter_interconnector_device_reference_number

See support_equipment_reference_number

adapter_interconnector_device_support_equipment_recommendation_data_number

See operational_test_program_support_equipment_recommendation_data_number

automatic_test_equipment_commercial_and_government_entity_code

See operational_test_program_commercial_and_government_entity_code

automatic_test_equipment_government_designator

The government designator of the ATE. The government-type designator, as obtained form MIL-STD-196-E, MIL-HDBK-1812 and MIL-DTL-18307H (ASG).

automatic_test_equipment_reference_number

See support_equipment_reference_number

end_item_acronym_code (EIAC)

A code that uniquely identifies the system/equipment end item. This code will be assigned by the requiring authority. It will remain constant throughout the item’s life cycle (e.g., TOW, PATRIOT, Tomahawk, Sparrow, and ALCM).

operational_test_program_apportioned_unit_cost_nonrecurring

See adapter_interconnector_device_apportioned_unit_cost_recurring

operational_test_program_apportioned_unit_cost_recurring

See adapter_interconnector_device_apportioned_unit_cost_recurring

operational_test_program_commercial_and_government_entity_code

See adapter_interconnector_device_commercial_and_government_entity_code

operational_test_program_coordinated_test_plan

A single-letter code that indicates whether the CTP is adequate to verify the suitability of the requested item for military application.

Table — Operational Test Program Coordinated Test Plan

operational_test_program_reference_number

Any number, other than a government activity stock number, used to identify an item of production, or used by itself or in conjunction with other reference numbers to identify an item of supply. Reference numbers include manufacturer's part, drawing, model, type, or source controlling numbers; manufacturer's trade name; specification or standard numbers; and, specification or standard part, drawing, or type numbers (for applicable formats see DOD 4100.39-M). The following precedence for reference number assignment should be used.

• First Precedent Reference Number. The line item is identified by a government or industry association specifications, drawing, or standard number, e.g., FED, MIL, JAN, AN, NEMA, SAE, which completely identifies the item including its physical, mechanical, electrical and dimensional characteristics. (If the government or industry association specification or standard number does not fully identify the item, then the actual manufacturer's identifying reference number becomes the first precedent reference number.) If the government or industry specification, drawing, or standard completely identifies the item, at least one additional reference number (see additional_reference_number_Type) citing a manufacturer or vendor reference number must be provided.
• Second Precedent Reference Number. When the line item is identified as "source control", "altered", or "selected" (MIL-DTL-31000C), the contractors assigned number is used.
• Third Precedent Reference Number. The item identifying part, drawing, or catalog number of the actual manufacturer that supplies the item. The manufacturer is the company or government activity exercising design control over the item.

operational_test_program_standards_for_comparison

A single-position code indicating a standard was identified against the support/test equipment was compared for testing of the UUT.

Table — Operational Test Program Standards for Comparison

operational_test_program_support_equipment_recommendation_data_number

A 10-position code assigned to each item of support equipment having a unique Reference Number and CAGE Code. It consists of the following subfields:

• a. System/Subsystem/Sub-subsystem Code – 6 chars

The first six-positions of the SERD Number comprise this subfield and identify support equipment to the system/subsystem/sub-subsystem that the support equipment supports. This code will be based on a combination of characters from MIL-PRF-83495B, Preparation of Manuals, Technical, Organizational Maintenance Manual Set.

• b. Sequence Number – 4 numeric

The last four digits of the 10-position SERD number indicates the number assigned sequentially to each unique SE item that is proposed for the system, subsystem, or subsubsystem. Sequence numbers shall begin with 0001 and run through 9999.

support_equipment_commercial_and_government_entity_code (CAGE)

See adapter_interconnector_device_commercial_and_government_entity_code

support_equipment_commercial_and_government_entity_code

See operational_test_program_commercial_and_government_entity_code

support_equipment_reference_number

Any number, other than a government activity stock number, used to identify an item of production, or used by itself or in conjunction with other reference numbers to identify an item of supply. Reference numbers include manufacturer's part, drawing, model, type, or source controlling numbers; manufacturer's trade name; specification or standard numbers; and, specification or standard part, drawing, or type numbers (for applicable formats see DOD 4100.39-M).

support_equipment_unit_under_test_allowance

See unit_under_test_allowance

support_equipment_unit_under_test_calibrations_measurement_requirements_summary_parameter_code

A code specifying whether or not a specific parameter is to be included in the CMRS.
Parameter is included in the CMRS Y
Parameter is not included in the CMRS N

support_equipment_unit_under_test_calibrations_measurement_requirements_summary_status

The CMRS status of the UUT. A code to indicate if a CMRS has been previously developed or is in process for the subject item. Codes are as follows:

Table — Support Equipment Unit Under Test Calibrations Measurement Requirements Summary Status

support_equipment_unit_under_test_commercial_and_government_entity_code

See operational_test_program_commercial_and_government_entity_code

support_equipment_unit_under_test_maintenance_plan_number

See unit_under_test_maintenance_plan_number

support_equipment_unit_under_test_parameter

See unit_under_test_parameter

support_equipment_unit_under_test_parameter_accuracy

A two character code linking the requirements set by the unit under test to the capabilities of the SE. A parameter grouping code of the support equipment unit under test that must match the parameter grouping code of the corresponding SE.

support_equipment_unit_under_test_parameter_group_code

See unit_under_test_logistics_support_analysis_control_number

support_equipment_unit_under_test_parameter_input_output_code

See unit_under_test_parameter_input_output_code

support_equipment_unit_under_test_parameter_range_from

See unit_under_test_parameter_range_to

support_equipment_unit_under_test_parameter_range_to

See unit_under_test_parameter_range_to

support_equipment_unit_under_test_parameter_range_value_code

See unit_under_test_parameter_range_value_code

support_equipment_unit_under_test_parameter_test_accuracy_ratio_actual

See unit_under_test_parameter_test_accuracy_ratio_desired

support_equipment_unit_under_test_parameter_test_accuracy_ratio_desired

See unit_under_test_parameter_test_accuracy_ratio_desired

support_equipment_unit_under_test_reference_number

See support_equipment_reference_number

support_equipment_unit_under_test_test_requirements_document_number

See unit_under_test_test_requirements_document_number

support_equipment_unit_under_test_work_package_reference

See unit_under_test_work_package_reference

task_alternate_logistics_support_analysis_control_number_code

A code used to allow documentation of multiple models of a system/equipment, or alternate design considerations of an item, using the same LCN breakdown.
NOTE:

• ALC of zero,zero “00” will always be used as the basic system. There are no blanks allowed. ALCs will be assigned from 01 to ZZ in ascending order.
• ALC equates to S1000D Disassembly Code Variant, which is a constituent element of the Data Module Code.

task_logistics_support_analysis_control_number

See unit_under_test_logistics_support_analysis_control_number

task_logistics_support_analysis_control_number_type

See unit_under_test_logistics_support_analysis_control_number_type

task_provision_alternate_logistics_support_analysis_control_number_code

See task_alternate_logistics_support_analysis_control_number_code

task_provision_commercial_and_government_entity_code

See operational_test_program_commercial_and_government_entity_code

task_provision_logistics_support_analysis_control_number

See unit_under_test_logistics_support_analysis_control_number

task_provision_logistics_support_analysis_control_number_type

See unit_under_test_logistics_support_analysis_control_number_type

task_provision_reference_number

See support_equipment_reference_number

task_provision_task_code

A data chain of six separate data subfields that uniquely identify each operator/maintenance task associated with particular items under analysis. The first five subfields provide information relative to the performance of the task itself. The sixth subfield is a task sequence code provided to differentiate tasks with identical entries in the first five subfields.

test_program_instruction_apportioned_unit_cost_nonrecurring

See adapter_interconnector_device_apportioned_unit_cost_recurring

test_program_instruction_apportioned_unit_cost_recurring

See adapter_interconnector_device_apportioned_unit_cost_recurring

test_program_instruction_commercial_and_government_entity_code

See operational_test_program_commercial_and_government_entity_code

test_program_instruction_reference_number

See support_equipment_reference_number

test_program_instruction_self_test

A single-position code indicating if support/test equipment or a unit under test can perform upon itself a test or series of tests, which shows whether it is operating within designed limits, and to indicate if the test function is automatic or must be manually induced.

Table — Test Program Instruction Self Test

test_program_instruction_support_equipment_recommendation_data_number

See operational_test_program_support_equipment_recommendation_data_number

test_program_instruction_technical_data_package

A single-position code indicating whether or not an adequate technical data package is available for procurement of TMDE test programs and test program instructions (TPIs) to test the unit under test (UUT).

Table — Test Program Instruction Technical Data Package

testing_support_equipment_commercial_and_government_entity_code

See operational_test_program_commercial_and_government_entity_code

unit_under_test_alternate_logistics_support_analysis_control_number_code

See task_alternate_logistics_support_analysis_control_number_code

unit_under_test_calibration_measurement_requirement_summary_parameter_code

See support_equipment_unit_under_test_calibrations_measurement_requirements_summary_parameter_code

unit_under_test_explanation_data

Narrative statements that further explain, justify, or substantiate any data entry concerning unit UUT related data.

unit_under_test_fault_isolated_replaceable_unit_ambiguity_group_1

Fault Isolation is a procedure employed to determine which particular unit or group of units is at fault for a malfunction or failure. Specific information related to the BIT capability to fault isolate is provided in the subfields of this block.
Ambiguity Group - a set of items at the same level of indenture having properties such that BIT can determine that at least one of the set is faulty, but is unable to determine which particular one.

unit_under_test_fault_isolated_replaceable_unit_ambiguity_group_2

See unit_under_test_fault_isolated_replaceable_unit_ambiguity_group_1

unit_under_test_fault_isolated_replaceable_unit_percent_failure_1

Fault Isolation is a procedure employed to determine which particular unit or group of units is at fault for a malfunction or failure. Specific information related to the BIT capability to fault isolate is provided in the subfields of this block.
Percent Failure - the percent of an item’s probable malfunctions, which can be isolated within a specific ambiguity group by means of BIT.

unit_under_test_fault_isolated_replaceable_unit_percent_failure_2

See unit_under_test_fault_isolated_replaceable_unit_percent_failure_1

unit_under_test_fault_isolated_replaceable_unit_test_requirements_document_indicator

A single-letter code indicating whether the fault isolated replaceable unit has a test requirements document assigned to it.

Table — Unit Under Test Fault Isolated Replaceable Unit Test Requirements Document Indicator

unit_under_test_logistics_support_analysis_control_number (LCN)

A code that represents a functional or hardware generation breakdown/disassembly sequence of system/equipment hardware including SE, training equipment, and installation (connecting) hardware. For additional information on assignment of LCN, refer to the GEIA-HB-0007.

unit_under_test_logistics_support_analysis_control_number_type (LCN Type)

A code indicating whether the LCN is representative of either a physical or functional breakdown.

unit_under_test_maintenance_plan_number

The number assigned by the government to identify an approved maintenance plan.

unit_under_test_parameter

The characteristics (e.g., volts, HZ, DC, etc.) that an item of TMDE is capable of measuring or that are to be measured on the item.

unit_under_test_parameter_accuracy

A narrative description of the tolerances of the corresponding parameter.

unit_under_test_parameter_input_output_code

A code specifying the corresponding parameter of the equipment in question (SE or UUT) as an input into equipment or output from the equipment. Codes are as follows:

Table — Unit Under Test Parameter Input Output Code

unit_under_test_parameter_operational_specification_code

A code indicating whether the associated parameter is operational or specification parameter of the UUT.

Table — Unit Under Test Parameter Operational Specification Code

unit_under_test_parameter_range_from

See unit_under_test_parameter_range_to

unit_under_test_parameter_range_to

The lowest or highest value of the parameter that the SE is capable of measuring.

unit_under_test_parameter_range_value_code

A code used to identify specific parameters as either a "range" or a specific "value". List specific value parameters in the "Range-From" block.

Table — Unit Under Test Parameter Range Value Code

unit_under_test_parameter_test_accuracy_ratio_actual

See unit_under_test_parameter_test_accuracy_ratio_desired

unit_under_test_parameter_test_accuracy_ratio_desired

A one-position code specifying a Test Accuracy Ratio (TAR). The TAR is determined by dividing the maximum permitted error of the unit to be measured or calibrated by the maximum known error of the measuring or generating device used to perform the measurement. The codes can be used for the desired TAR or the actual TAR.

Table — Unit Under Test Parameter Test Accuracy Ratio Desired

unit_under_test_test_requirements_document_number

The number assigned to the Unit under Test Test Requirements Document.

unit_under_test_work_package_reference

The work package reference of the UUT.
A six-position entry identifying the technical manual/technical order section showing all tools and SE used to maintain the articles requiring support.