Template:— functional_breakdown (fun_brkd)
Context:— UK_Defence		 Date: 2009/04/17 11:54:44
Revision: 1.2
CoverContentsDescriptionBus. perspectiveBus. obj.Model diags.Input params.Ref. params.Instantiation pathInstance diags.CharacterizationsIssuesin situ

Issue raised against: functional_breakdown

GENERAL issues

Closed issue Issue: MWD-1 by Mike Ward (2008-08-08) minor_technical issue
Resolution: Accept. Status: closed

The description parameter is mandatory in the CBIS model. If this is really mandatory, the template can remain as it is except that the "optionality" attribute should be reset to "no". If this parameter is optional, the CBIS modle should be revised and the description assignment sould be changed ot a characterization.
Comment: (Tim Turner 2008-09-08)
attribute set to "no"

Closed issue Issue: MWD-2 by Mike Ward (2008-08-08) minor_technical issue
Resolution: Accept. Status: closed

Characterizations that do not correspond to anything in the CBIS model should be removed.
Comment: (Tim Turner 2008-09-08)
CBIS is a guide - not definitive. Plus it does not adequately follow through with all references at the object level. All characterizations are realistic and possible, but only shown at the DEX level. See Fig 2 in the FunctionalBreakdownDEX.

Closed issue Issue: TR-01 by TrishaRollo (2008-10-09) minor_technical issue
Resolution: Accept. Status: closed

CBIS Optional type attributes in figure 2 is mapped to PLCS template that makes it mandatory. Either CBIS or PLCS template should be changed or mapped as characterisation.
Comment: (AnnMeads 2008-10-20)
Made mandatory in CBIS.