alternate_logistics_support_analysis_control_number_code (ALC)

A code used to allow documentation of multiple models of a system/equipment, or alternate design considerations of an item, using the same LCN breakdown.
NOTE:

• ALC of zero, zero 00 will always be used as the basic system. There are no blanks allowed. ALCs will be assigned from 01 to ZZ in ascending order.
• ALC equates to S1000D Disassembly Code Variant, which is a constituent element of the Data Module Code.

armed_services_vocational_aptitude_battery_aptitude_element

This is a battery of tests given to identify the aptitudes of the personnel being tested. These tests are used in performing trade-offs of personnel aptitude and training in the prediction of performance of military systems.

armed_services_vocational_aptitude_battery_aptitude_element_expected_range_high

These elements apply ranges to a battery of tests for the skill specialty under analysis

• Armed Service Qualification Test (AFQT) - a measure of general trainability compiled from the ASVAB test.
  • ASVAB AFQT Element Expected Range Low
  • ASVAB AFQT Element Expected Range High
• These elements apply ranges to a battery of tests given to identify the aptitudes of the personnel being tested. These tests are used in performing trade-offs of personnel aptitude and training in the prediction of performance of military systems.
  Armed Service Aptitude Battery (ASVAB)
  • ASVAB Element Expected Range Low
  • ASVAB Element Expected Range High

armed_services_vocational_aptitude_battery_aptitude_element_expected_range_low

See armed_services_vocational_aptitude_battery_aptitude_element_expected_range_high

armed_services_vocational_aptitude_battery_aptitude_element_lowest_percent_high

These elements apply ratings to a battery of tests for the skill specialty under analysis

• Armed Service Qualification Test (AFQT) - a measure of general trainability compiled from the ASVAB test.
  • ASVAB AFQT Lowest Percent Low
  • ASVAB AFQT Lowest Percent High
• These elements apply ratings to a battery of tests given to identify the aptitudes of the personnel being tested. These tests are used in performing trade-offs of personnel aptitude and training in the prediction of performance of military systems.
  Armed Service Aptitude Battery (ASVAB)
  • ASVAB Element Lowest Percent Low
  • ASVAB Element Lowest Percent High

armed_services_vocational_aptitude_battery_armed_forces_qualification

Data documenting the ASVAB scores for the skill specialty under analysis. AFQT score.

armed_services_vocational_aptitude_battery_armed_forces_qualification_test_expected_range_high

See armed_services_vocational_aptitude_battery_aptitude_element_expected_range_high

armed_services_vocational_aptitude_battery_armed_forces_qualification_test_expected_range_low

See armed_services_vocational_aptitude_battery_aptitude_element_expected_range_high

duty_position_requiring_a_new_or_revised_skill_test_score

The title of an occupation for which a new skill is required.

end_item_acronym_code

A code that uniquely identifies the system/equipment end item. This code will be assigned by the requiring authority. It will remain constant throughout the item’s life cycle (e.g., TOW, PATRIOT, Tomahawk, Sparrow, and ALCM).

hour_labor_rate

The basic hourly rate expressed in dollars and cents for a repairman with a specific skill.

logistics_support_analysis_control_number

A code that represents a functional or hardware generation breakdown/disassembly sequence of system/equipment hardware including SE, training equipment, and installation (connecting) hardware. For additional information on assignment of LCN, refer to the GEIA-HB-0007.

logistics_support_analysis_control_number_type

A code indicating whether the LCN is representative of either a physical or functional breakdown.

Table — Logistics Support Analysis Control Number Type

new_or_modified_skill_level_code

See skill_level_code

new_or_modified_skill_specialty_code

See skill_specialty_code

physical_and_mental_requirements_narrative

A textual description pertaining to physical and mental requirements for a defined job skill.

physical_and_mental_requirements_narrative

recommended_civilian_grade

Identifies the recommended civilian grade that is necessary to operate, test, or repair the system/equipment. A plan prescribed by law or other authoritative source that governs the compensation paid an employee (e.g., WG06, WDll, and GS07).

recommended_military_rank_rate

Identifies the recommended military grade that is necessary to operate, test, or repair the system/equipment. Identifies military personnel by rank/rate. Data chain is composed of two data elements, Military Personnel Class and Pay Level Serial Number, in that order.

Table — Recommended Military Grade to Operate, Test, or Repair the System/Equipment

security_clearance

A single-position code indicating the type of clearance required to access classified information.

Table — Single-Position Codes for Type of Clearance

skill_level_code

A single-position code indicating the skill level of a given SSC.

Table — Single-Position Codes for Skill Level

skill_specialty_code (SSC)

Describes the maintenance or operator skill required to accomplish the task.

skill_specialty_code

Describes the maintenance or operator skill required to accomplish the task. Codes arespecified in publications listed below:

Table — Skill Specialty Codes

FPM Supplement 5l2-l, Civil Service Commission, Job Grading Standard

subtask_number

A three-position code to indicate sequence of the procedural step as a subtask. Subtask numbers shall begin with 001 through 999, and are assigned to each sequential subtask required to perform a given task. A subtask is an activity (perception, decisions, and responses) that fulfills a portion of the immediate purpose within a task.

subtask_person_identifier

A three-position code identifying each person required to perform the subtask (codes "A" through "999"). Within a task, a given Person ID relates to a specific "Job" and a specific Skill Specialty Code.

task_code

A data chain of six separate data subfields that uniquely identify each operator/maintenance task associated with particular items under analysis. The first five subfields provide information relative to the performance of the task itself. The sixth subfield is a task sequence code provided to differentiate tasks with identical entries in the first five subfields.

test_score

The minimum acceptable skill level test score necessary to qualify an individual for regular training. The specific skill level tests will be supplied by the requiring authority.

training_cost

The cost in dollars, of training a single skill.